Why Correct Delivery Matters in High-Load Press Applications
Presses operate under repeated load, movement, impact, and mechanical stress. In workplaces with hydraulic, eccentric, mechanical, or injection presses, lubrication goes beyond routine maintenance. It is essential for the machine’s reliability.
For teams who understand lubrication systems, the question is not whether lubrication is important. The real concern is whether the right lubricant gets delivered to the right spot, in the right amount, at the right interval, and under actual working conditions.
Press applications put significant strain on moving components such as guides, slides, rods, connecting points, gears, bearings, and load-bearing surfaces. These areas face movement, pressure, friction, heat, contamination risks, and repetitive cycles. When lubrication is inconsistent or improperly applied, it usually does not lead to immediate failure. Instead, it results in gradual wear, increased resistance, greater maintenance demands, and ultimately downtime that could be minimised with a better-controlled lubrication strategy.
Why Press Lubrication Requires Application-Specific Thinking
Not all presses are alike. A smaller production press has different lubrication needs than a larger press that operates under heavier loads or longer duty cycles. This also holds true for eccentric presses, hydraulic presses, and injection presses. The lubrication system must be tailored to the machine’s structure, lubrication points, working environment, type of lubricant, operating frequency, and the required level of control.
In eccentric press applications, parts like connecting rods, con-rod heads, guides, and gears experience high levels of stress. Oil lubrication is often recommended for these areas since it supports movement during repeated operations. In injection press applications, both oil and grease lubrication may be needed depending on whether the system supports mobile surfaces, fixed surfaces, skids, guides, rods, or reaction heads.
This is where system design becomes more crucial than simply selecting a product. A pump, injector, line, or controller cannot be assessed in isolation. The overall value lies in how the system is arranged as a complete lubrication circuit.
The Risk of Inconsistent Lubrication
In industrial maintenance, poor lubrication practices and contamination are well-known causes of early component failure. SKF reports that these issues account for around half of all early rolling bearing failures. While this statistic does not apply only to press machines, it emphasises a key maintenance fact: consistent lubrication directly affects mechanical reliability.
For press environments, inconsistent lubrication can lead to several operational risks:
- Increased friction between moving surfaces
- Higher component wear over time
- Heat buildup in high-load areas
- Poor lubricant film formation
- Missed lubrication points during manual maintenance
- Over-lubrication in some areas and under-lubrication in others
- Increased risk of unplanned stoppages
The issue is rarely that maintenance teams lack understanding of lubrication. Often, the challenges are related to access, consistency, timing, production pressures, or uncertainty about whether each lubrication point is receiving the necessary amount.
Automated lubrication can alleviate these issues by providing repeatable delivery. It reduces dependence on manual application and helps establish a more controlled lubrication routine during equipment operation.
Smart3 Pump and 33V Series Injectors in a Press Application





Control Lubrication Systems recently supplied lubrication components for a press lubrication installation completed by a client. The system featured a DropsA Smart3 Pump and DropsA 33V Series Injectors, chosen for a smaller press application requiring controlled lubricant delivery.
This installation shows how compact press applications can still benefit from a well-designed lubrication system. Smaller presses may not need the same scale of system as larger machines, but they too need reliable lubricant delivery to the right points. With the right pump and injector combination, the system can maintain consistent dosing without complicating the installation.
The DropsA Smart3 is a compact electric pump for oil and fluid grease lubrication. It is often used in single-line systems and is specifically designed for 33V injector systems. The pump has a reservoir capacity of 2 to 3 litres, a maximum pressure of 30 bar, and flow rates that DropsA lists at 180 cc/min at 2800 rpm and 220 cc/min at 3500 rpm, depending on its configuration.
The 33V Series Injectors are positive displacement injectors that deliver precise amounts of lubricant. DropsA indicates delivery ranges from 0.06 cc to 1.00 cc, depending on the injector chosen. The 33V system accommodates oil from 32 to 2000 cSt and fluid grease up to NLGI 0, with a minimum pressure of 12 bar and a maximum pressure of 50 bar.
For a press lubrication system, this combination is effective. The pump supplies the lubricant, while the injectors manage dosing to each lubrication point. This is important in press applications where not all points require the same quantity of lubricant. The injector configuration allows the system to be designed around the machine rather than forcing the machine to conform to a generic lubrication setup.
Bigger Presses Require More Than Bigger Components
Control Lubrication Systems is also working on a larger press lubrication installation. Once completed, before-and-after visuals will highlight an important point: larger presses do not just need “more lubrication.” They require a carefully considered lubrication layout.
In larger presses, system design must take into account:
- The number and position of lubrication points
- Line lengths and pressure losses
- Type and viscosity of the lubricant
- Machine cycle frequency
- Access for inspection and maintenance
- Environmental contamination
- Required dosing accuracy
- Integration with existing machine operations
- Future serviceability
A bigger press may have more lubrication points, heavier loads, larger moving surfaces, longer pipe runs, and more complex access needs. In these situations, proper system layout is essential. A well-designed system should ensure consistent delivery to all necessary points while remaining practical for inspection, maintenance, and servicing.
The aim is not to install the most complicated system. It is to implement the right system for the application.
Product Supply, System Support, and Practical Application
Control Lubrication Systems offers lubrication products, automated systems, and the DropsA range of lubrication solutions for industrial uses. This includes support for pumps, injectors, metering units, distribution blocks, valves, accessories, and complete system needs.
For press lubrication applications, Control Lubrication Systems can help with both product supply and system recommendations based on machine requirements. Sometimes, this might involve a compact single-line lubrication solution using a Smart3 pump with 33V Series injectors. In other instances, a larger or more complex system may be necessary, depending on the press size, number of lubrication points, operating intensity, and lubricant specifications.
The recent installation exemplifies how supply support works in practice. Control Lubrication Systems provided the Smart3 Pump and 33V Series Injectors, while the client managed the installation. This teamwork ensures that the right lubrication components are available for the task and that the installation aligns with site and machine requirements.
Final Thought
Press lubrication should not be seen as a standard product purchase. It should be regarded as a technical decision that fits the application.
For production teams, maintenance teams, engineers, and procurement departments, the focus should be clear: choose a lubrication system that matches the press, the lubricant, the lubrication points, the operating cycle, and the maintenance strategy.
A correctly specified press lubrication system promotes smoother machine movement, more consistent lubricant delivery, reduced manual maintenance demands, and better long-term equipment care.
Control Lubrication Systems provides a range of lubrication products and press lubrication solutions for small, medium, and large press applications.
Contact Control Lubrication Systems to discuss your press lubrication needs or request a quote for the right lubrication products for your application.
011 793 6101 | 064 520 7559
